Wide body kits
- SupraDrivr77
- Ricer
- Posts: 28
- Joined: 04 Apr 2005, 23:55
- Location: Falls Church,VA
Wide body kits
In the PS2 version of NFSU2, when do you get the wide body kits?
edit:nvr mind, my bad DON'T pay attention to this post, since i've forgoten to use search . lock this if you have to.
edit:nvr mind, my bad DON'T pay attention to this post, since i've forgoten to use search . lock this if you have to.
- Andre_online
- Unbeatable
- Posts: 7730
- Joined: 04 Jun 2004, 10:43
- Location: Singapore (GMT+8)
- Contact:
-
- Ricer
- Posts: 18
- Joined: 04 May 2004, 08:21
- 1995-eclipse
- Drift King
- Posts: 451
- Joined: 12 Apr 2004, 06:48
- Location: Australia
- SupraDrivr77
- Ricer
- Posts: 28
- Joined: 04 Apr 2005, 23:55
- Location: Falls Church,VA
- DarrenR21373
- Professional
- Posts: 1102
- Joined: 23 Oct 2004, 15:11
- Location: Little Britain
- NFSBLUECIVIC
- Professional
- Posts: 1108
- Joined: 16 Nov 2004, 01:38
- Location: Smithfield Utah U.S.A.
To answer your questions ahead of time, no this isn't my creation. I got this form another forum that I'm on. And also you should know this might be the longest post on this forum. But who cares. Just enjoy thise very ricey post.
How To Make Your Own Custom Body Kit!!!
Basically all you have to do to make your very own CUSTOM CARDBOARD BODY KIT is make side skirts, front bumper, and rear bumper. Everything else for the car is optional. Stuff we made to pimp out the car were a hood scoop, rear spoiler, custom muffler, underbody lights, and spinner rims.
To make the front bumper:
1. Measure out the length of the bumper.
2. Cut pieces accordingly
3. Tape the bumper tastefully. If may help to do the bumper in 3 pieces. one for the direct front, and two others for the sides of the front.
To make the side skirts:
1. Measure out the length of the sides.
2. Do a rough tape on the length.
3. Cut out the door openings so the doors can open.
4. Tape that mofo on!
To make the rear bumper:
1. Follow the same guidlines as the front bumper.
2. Dont forget to leave a hole for the muffler.
To make the rear spoiler:
1. Construct the sides and top.
2. Tape it securely together.
3. Make sure when attaching to the car that you leave space on the sides to hold it on securely.
To make the hood scoop:
1. Similar to spoiler except only use one piece of cardboard.
To make muffler:
1. Get a cup and tape it on the existing muffler opening.
To make Underbody lights:
1. Attach glowsticks to sides, front, and rear bumpers.
2. If glowsticks are bright enough, you can actually put them on the inside of the cardboard. In our case, our glowsticks sucked so we had to tape them on the sides.
To make Spinners:
1. Make rim shape.
2. Attach cardboard with bolt sticking out to existing hubcaps or rims.
3. Put spinner rim on the bolt and attach it with a nut.
4. Make sure that mofo is secure. (2 of ours came off in our first ride).
5. Make sure they are slightly loose so they can spin.
Now for the Before and After Pics!!!!!:
Before:
After:
A proud new owner:
Can you say RICE ROCKET!!!!!?????
How To Make Your Own Custom Body Kit!!!
Basically all you have to do to make your very own CUSTOM CARDBOARD BODY KIT is make side skirts, front bumper, and rear bumper. Everything else for the car is optional. Stuff we made to pimp out the car were a hood scoop, rear spoiler, custom muffler, underbody lights, and spinner rims.
To make the front bumper:
1. Measure out the length of the bumper.
2. Cut pieces accordingly
3. Tape the bumper tastefully. If may help to do the bumper in 3 pieces. one for the direct front, and two others for the sides of the front.
To make the side skirts:
1. Measure out the length of the sides.
2. Do a rough tape on the length.
3. Cut out the door openings so the doors can open.
4. Tape that mofo on!
To make the rear bumper:
1. Follow the same guidlines as the front bumper.
2. Dont forget to leave a hole for the muffler.
To make the rear spoiler:
1. Construct the sides and top.
2. Tape it securely together.
3. Make sure when attaching to the car that you leave space on the sides to hold it on securely.
To make the hood scoop:
1. Similar to spoiler except only use one piece of cardboard.
To make muffler:
1. Get a cup and tape it on the existing muffler opening.
To make Underbody lights:
1. Attach glowsticks to sides, front, and rear bumpers.
2. If glowsticks are bright enough, you can actually put them on the inside of the cardboard. In our case, our glowsticks sucked so we had to tape them on the sides.
To make Spinners:
1. Make rim shape.
2. Attach cardboard with bolt sticking out to existing hubcaps or rims.
3. Put spinner rim on the bolt and attach it with a nut.
4. Make sure that mofo is secure. (2 of ours came off in our first ride).
5. Make sure they are slightly loose so they can spin.
Now for the Before and After Pics!!!!!:
Before:
After:
A proud new owner:
Can you say RICE ROCKET!!!!!?????
- Andre_online
- Unbeatable
- Posts: 7730
- Joined: 04 Jun 2004, 10:43
- Location: Singapore (GMT+8)
- Contact:
- Dragon-of-Rune
- Unbeatable
- Posts: 4200
- Joined: 13 Jan 2004, 19:29
- Location: The Netherlands
horible
Horible thing. I would never do that sort of thing to my car.Proud owner you say, he he I would never be proud to have ride like that, to be thrue I will be shame to ride around world car like that or show in that in front of disco or something. And now to say something. How the hell do you think that will spoiler stay on trunk.(It will if he will drive about 20 km/h, only thing that is realy good is ( IF YOU CAN READ THIS.....). Even this was joke I will never be so depressed or patetic to do car that sort of thing!
Sorry if I say something that will put you in bad, I just telling you my opinion!
Sorry if I say something that will put you in bad, I just telling you my opinion!
User deactivated: Habitual rule breaking; Abject lack of respect for the community.
- SupraDrivr77
- Ricer
- Posts: 28
- Joined: 04 Apr 2005, 23:55
- Location: Falls Church,VA
- NFSBLUECIVIC
- Professional
- Posts: 1108
- Joined: 16 Nov 2004, 01:38
- Location: Smithfield Utah U.S.A.
-
- Ricer
- Posts: 25
- Joined: 13 Dec 2004, 04:34
- Contact:
-
- Ricer
- Posts: 25
- Joined: 13 Dec 2004, 04:34
- Contact:
Thank You! I played loooong last night...I should have nfsu 2 BEAT but I havent (got this game like 3 days after release) because i took a break...I left my game at 98% unlocked and 53% game completeion...now the unlocks are 100% and the game completion is in the 70s or so...do you get anything else by beating the game? like very pimp rims and spinners
Paint add-ons? etc.
Paint add-ons? etc.
- Andre_online
- Unbeatable
- Posts: 7730
- Joined: 04 Jun 2004, 10:43
- Location: Singapore (GMT+8)
- Contact:
-
- Ricer
- Posts: 25
- Joined: 13 Dec 2004, 04:34
- Contact:
- Andre_online
- Unbeatable
- Posts: 7730
- Joined: 04 Jun 2004, 10:43
- Location: Singapore (GMT+8)
- Contact: