Page 1 of 1
Widebody kit, but what about the axle's?
Posted: 29 Nov 2006, 22:04
by korge
Okay. If you installed a widebody kit on your car, the wheelset is now tucked under those fender flares.
How do you get the wheels to sit correctly under the fenders? How would you get the more GT body look so the body doesnt look overwhelming on the wheels?
Posted: 29 Nov 2006, 22:37
by blah2
You need to buy new axels. That's because the normal axels aren't made for wide bodykit right ?
Posted: 29 Nov 2006, 22:37
by steelsnake00
Depends on the car. Some people use spacers, some people use wider axels, some people use wider wheels.
blah2 wrote:You need to buy new axels. That's because the normal axels aren't made for wide bodykit right ?
Depends. Most people don't actually bother.
Posted: 29 Nov 2006, 22:48
by korge
New axles is too much work, money, and just overall hassle.
Tell me more bout these Spacers and how would one know if the wheels are wide enough for the right look.. Doesnt that interfere with turning?
Posted: 29 Nov 2006, 23:38
by steelsnake00
korge wrote:New axles is too much work, money, and just overall hassle.
Tell me more bout these Spacers and how would one know if the wheels are wide enough for the right look.. Doesnt that interfere with turning?
They're essentially an adapter, you use longer bolts in them. I don't reccomend using spacers more than 40 or 45mm because after that point then the extra stress is liable to damage your axels.
Posted: 30 Nov 2006, 00:09
by blah2
I suggest spacers of 20mm + wider wheels. That means bigger surface car stands on, better grip, better handling, right ?