NFS5:PU tips and techniques on driving.
Posted: 16 Sep 2003, 09:52
About 6 months ago, when I was a total n00b in PU I looked everywhere for tips and tricks on driving. PU is a realistic game and it does require a bit (well more than that) of skill to succesfully drive your car. And so, today, perhaps out of boredom, having mastered the game, I decided to list all all the techniques I know and perhaps persuade you to post yours. And so we begin.
NOTE: If you want to seriously drive, switch to manual transmission, its hard to master at first, but its all worth it. Besides, only Grannys use auto on their little Hondas....All the techniques listed either require or will perform better with manual. For example, say you are coming to a very sharp turn which you can barely make it without scratching the sides. On automatic: You turn, you loose speed and transmition shifts down like a gear, but when it does that, you usually end up with low revs and you have to spend a couple of seconds getting back to your "cruising" speed. Now with manual: As you come to the turn and actually start turning (and loosing speed) you shift down a gear (but only when your current gear is in the mid revs)so when you finish turning, you end up on high revs (just above overdrive) one gear down. As you find out, a car accelerates faster on high revs than on low. I might be wrong but thats how it seems.
360: Quite easy to do, really. First choose the place where you want to do the trick, mind you, try to choose the spot that is quite far away so that you'll be prepared (that is if you want to do 360 on a normal track). As you come to your chosen spot, keep your foot on the gas pedal and press the handbrake and sharply turn right, now as the car rotates about 170-179 degrees turn your steering wheel the other way. Now at this point, if you want quick recovery, shift down a gear (or more if required, remember to watch your tachometer!) and speed away!
180+reverse+180 back: Same as 360 but you don't turn your steering wheel the opposite way, in fact you even quickly shift to reverse and slam your gas pedal. The car will respond by going backwards. Now at some point, when you get tired of riding backwards, quickly turn your steering wheel whichever direction you prefer and switch to say 1st gear (then second if on very high revs) and thats it, you'll recover.
Recovering from 90 degree slides: Sometimes you can encounter those nasty and uncontrollable slides (especially with Turbos on wrong tires) which first put you 90 degrees to the road and then if you try to counter-steer even 180 degrees. Remember, if you end up perpendicular to the road, DO NOT try to counter-steer (ie, if you slide left, you counter-steer right and vice versa) but rather steer the opposite way, which, weirdly, will bring you back on course. I'm still researching this technique but it does seem to work.
Well that seems to be all that comes into my head for now. I was wondering if anyone knows how to effectively conquer hairpins without loosing too much speed. My current way of doing it is simply stick to the opposite side of the turn and then at the last moment sharply turn. but that usually sees me wither hitting the middle fence-thing or sending me sliding into the nearest barrier.
NOTE: If you want to seriously drive, switch to manual transmission, its hard to master at first, but its all worth it. Besides, only Grannys use auto on their little Hondas....All the techniques listed either require or will perform better with manual. For example, say you are coming to a very sharp turn which you can barely make it without scratching the sides. On automatic: You turn, you loose speed and transmition shifts down like a gear, but when it does that, you usually end up with low revs and you have to spend a couple of seconds getting back to your "cruising" speed. Now with manual: As you come to the turn and actually start turning (and loosing speed) you shift down a gear (but only when your current gear is in the mid revs)so when you finish turning, you end up on high revs (just above overdrive) one gear down. As you find out, a car accelerates faster on high revs than on low. I might be wrong but thats how it seems.
360: Quite easy to do, really. First choose the place where you want to do the trick, mind you, try to choose the spot that is quite far away so that you'll be prepared (that is if you want to do 360 on a normal track). As you come to your chosen spot, keep your foot on the gas pedal and press the handbrake and sharply turn right, now as the car rotates about 170-179 degrees turn your steering wheel the other way. Now at this point, if you want quick recovery, shift down a gear (or more if required, remember to watch your tachometer!) and speed away!
180+reverse+180 back: Same as 360 but you don't turn your steering wheel the opposite way, in fact you even quickly shift to reverse and slam your gas pedal. The car will respond by going backwards. Now at some point, when you get tired of riding backwards, quickly turn your steering wheel whichever direction you prefer and switch to say 1st gear (then second if on very high revs) and thats it, you'll recover.
Recovering from 90 degree slides: Sometimes you can encounter those nasty and uncontrollable slides (especially with Turbos on wrong tires) which first put you 90 degrees to the road and then if you try to counter-steer even 180 degrees. Remember, if you end up perpendicular to the road, DO NOT try to counter-steer (ie, if you slide left, you counter-steer right and vice versa) but rather steer the opposite way, which, weirdly, will bring you back on course. I'm still researching this technique but it does seem to work.
Well that seems to be all that comes into my head for now. I was wondering if anyone knows how to effectively conquer hairpins without loosing too much speed. My current way of doing it is simply stick to the opposite side of the turn and then at the last moment sharply turn. but that usually sees me wither hitting the middle fence-thing or sending me sliding into the nearest barrier.