I would like to edit GT3 RS stripe texture, is it possible to do with a vinyl editor?
I want to invert the stripe color.
Thanks.
![Wink :wink:](./images/smilies/icon_wink.gif)
Thanks.cparty wrote:You have to remove the 'texture'-vinyl first, after that, re-apply it as normal vinyl (the stock one) and you can set the color just like normal. Check this thread http://forum.nfsunlimited.net/viewtopic.php?t=13089 on how to mess with customization slots and 'texture'-vinyls. The bytes you are looking for are 537D.
greets
cparty
Tsearch is fine, but it will be more complicated to get to the correct customization2 as the memory addresses change and you will also find the bytes 537D a lot more than in the savegame. So I suggest you try editing it in your save (after you've done a backup of course).AUTOart wrote:I repace 537B with 3393 and I can remove the vinyl. I re-apply it but I can't the color?
There are 3 BMW carcodes, so the carcode depends on which one of those you bought/added.Finalmaster2 wrote:Ok, what is the code for BMW then? I'd like to remove/edit it's "texture"-vinyl. This is BMW M3 GTR's hex, am I right?
4E 4A CC 23 B3 5F 08 4E
What is the third BMW code? and what is different from this two i already know about.cparty wrote:There are 3 BMW carcodes, so the carcode depends on which one of those you bought/added.
Greets
cparty
The 3rd carcode is C4053AF9 961642D4. The car is identical with the faster version. When you look at the whole carcodes you see plenty of codes starting with C4053AF9. There is always an equivalent car with a different code. It looks like some of the bonus/custom/special cars use the C4053AF9 version codes, but never a stock one.Ceano wrote:What is the third BMW code? and what is different from this two i already know about.
4E4ACC23 B35F084E 20000200 FFFF0000 <<BMW M3 GTR Race (fast)
4E4ACC23 0EE2332A 20000200 FFFF0000 <<BMW M3 GTR Race (slow)
Unfortunately it's not that easy. Take a look at my picture:dice66 wrote:this is what you have to look for. I changed the 557D with 1234 and removed the vinyl. If you are using Tsearch try searching for the first two codes EA38 9706 ,and if it shows to many results search for the first 3 and so on...
No, the carcode would still be 4E4ACC23 B35F084E. You have to get to the customization2 and edit there.Finalmaster2 wrote:So would that code go then like this?
53 7D 4E 4A CC 23 B3 5F 08 4E
You can do it the same way. Add/buy the GT500, remove the texture (697D), and add the stock vinyl which can be colored. I can't see any orange there though. If you meant the GT3, then the answer is yes & no. I haven't found a way to just remove them, but some other textures will override those colors when applied.drftkng wrote:What about the 2007 Shelby? I want to make one with blue stripes and a white body. Oh, and also, is there any way to change the orange on the spoiler and mirrors?
Yeah, sounds like you are on the right trackdice66 wrote:I tried to find a way to add a spoiler to the BMW and i'm pretty close![]()
i changed the 3547for the BMW to 2B38 that's from the R8 and managed to add spoilers but theres a problem: the audi is smaller in height and when i put the spoiler to the bmw it get's through the trunk. I now have to find a car that has the same height in the trunk.
Hmm, try Nissan Skyline GTR? In my opinion, it should be almost same height as BMW M3 GTR. I can't check it now, because I'm on Thailand and I don't have my computer here.dice66 wrote:I tried to find a way to add a spoiler to the BMW and i'm pretty close![]()
i changed the 3547for the BMW to 2B38 that's from the R8 and managed to add spoilers but theres a problem: the audi is smaller in height and when i put the spoiler to the bmw it get's through the trunk. I now have to find a car that has the same height in the trunk.
Sounds great, just do it when you find some spare time.cparty wrote:Yes, I'll try to write something. I'm a bit short of time though.Ceano wrote:Could you write a tutorial how to edit the customization2 section with Tsearch, please
Then i can add it to the first post in my NFS Carbon: Hex Editing [Tips & Tricks] thread.
Greets
cparty
And no, 33 93 isn't the answer, it removed the whole texture.cparty wrote:You have to remove the 'texture'-vinyl first, after that, re-apply it as normal vinyl (the stock one) and you can set the color just like normal. Check this thread http://forum.nfsunlimited.net/viewtopic.php?t=13089 on how to mess with customization slots and 'texture'-vinyls. The bytes you are looking for are 537D.
greets
cparty