How to make a 3 color vinyl using Photoshop
How to make a 3 color vinyl using Photoshop
How to make a 3 color vinyl using Photoshop
Steps1 open a car template
Step2 make new layer & use the gradient tool, use the 3 colors (RGB)
Step3 make a 3rd layer make blocks of color for the front, rear & additional parts of the car
Step4 save this as a *.PSD “you may need to move bits around after testing with all the car partsâ€
Step5 remove car template, flatten image & save as a *.DDS & install
Steps1 open a car template
Step2 make new layer & use the gradient tool, use the 3 colors (RGB)
Step3 make a 3rd layer make blocks of color for the front, rear & additional parts of the car
Step4 save this as a *.PSD “you may need to move bits around after testing with all the car partsâ€
Step5 remove car template, flatten image & save as a *.DDS & install
Last edited by chad on 01 Nov 2004, 12:56, edited 1 time in total.
ok guys, this is the pic from our friend Chad
well...I must try it
edit: I upload now the pic (thanks to Bojan for fixing the problem), I need to clean my attachbox in pm
well...I must try it
edit: I upload now the pic (thanks to Bojan for fixing the problem), I need to clean my attachbox in pm
- Attachments
-
- how_to.jpg
- (180.87 KiB) Downloaded 5003 times
Last edited by ViperJay on 06 Nov 2004, 22:51, edited 2 times in total.
Sorry about that, I just remembered of some settings on this board and saw that attaching files for users was not permitted. It's been fixed now.ViperJay wrote:ok guys, this is the pic.
I post it cause (strange thing) it seems to be impossible to post a pic here in this thread (or at least for chad, and me too....I don't know why)
Mr. chad, i followed the instructions and made my first vinyl ever! i changed it a bit but it doesn't matter! i made some other vinyls too! all based in the 3colors by chad! i heve another problem. i made one for the celica and in the back of the car under the spoiler the vinyl is black!! why this happens? i hope you understand... and some other areas of the car appear black too.pls help me because i don't know anything from photoshop..
I'll try answering you...
can be 2 things:
1-check out the mask, if you have some uncovered zone where you have the body of your car (notice that the template isn't perfectly covering all the body)
2-with some cars, and with some body parts, you'll have problems like that, I don't know why this happens, but if you, for example, made a whole covering white vynil, you can still have some different parts, like the black part you see...I just noticed that in a couple of car I made vynils for
(so, ifit's not the 1 is the 2 I think)
hope this can help
can be 2 things:
1-check out the mask, if you have some uncovered zone where you have the body of your car (notice that the template isn't perfectly covering all the body)
2-with some cars, and with some body parts, you'll have problems like that, I don't know why this happens, but if you, for example, made a whole covering white vynil, you can still have some different parts, like the black part you see...I just noticed that in a couple of car I made vynils for
(so, ifit's not the 1 is the 2 I think)
hope this can help
i think your rigth
i think viperjay with step one is rigth, i think its the car template thats being sceen.
i do remove the car template before i flatten it to a *.dds
all the best chad.
i do remove the car template before i flatten it to a *.dds
all the best chad.
-
- Stock
- Posts: 1
- Joined: 01 Nov 2004, 12:20
Just to check, are you installing over a vinyl that supports 3colours? “as in the readme in the downloadâ€gianquinto wrote:hi
im kinda new to nfsu
but did some other nfs editing,
i love the 3 color vinyl,
but how do i set all colors ingame?
when i click on vinyl color, it only changes the back of my car.
anyone knows?
If you have tried this? Please post a pic of the problem. And we can see what to do.
All the best chad.
no window marks
i have got round the marks on the windowssphinxman wrote:ok thanks chad. this is my first vinyl based to your directions.. can you see behind the rear window? this is the black area i was telling you... what do you think about the vinyl? it's not really something but it's my first!
the golf & 350z are a pain to get to work with all the car body parts.
- Attachments
-
- no more marks.jpg
- (84.19 KiB) Downloaded 5106 times
nice work sphinxman, it's really well made
@chad: can you help me guy, I'm trying to fix a black stripe appearing on the skyline's back (where there is "skyline" written, between the tail lights); you can see it only with 2 or 3 rear bumpers, but I hate it
I've made full covering body vynils but nothing changed with my work...
did you noticed it before?
@chad: can you help me guy, I'm trying to fix a black stripe appearing on the skyline's back (where there is "skyline" written, between the tail lights); you can see it only with 2 or 3 rear bumpers, but I hate it
I've made full covering body vynils but nothing changed with my work...
did you noticed it before?
hi viperjay, i will have a look & let you know!ViperJay wrote:nice work sphinxman, it's really well made
@chad: can you help me guy, I'm trying to fix a black stripe appearing on the skyline's back (where there is "skyline" written, between the tail lights); you can see it only with 2 or 3 rear bumpers, but I hate it
I've made full covering body vynils but nothing changed with my work...
did you noticed it before?