Please I need help. I'm new here.

Ask and answer questions about Need for Speed Most Underground 2.
Be sure to search first!
Post Reply
NFSU2LORD
Stock
Stock
Posts: 1
Joined: 01 Dec 2004, 17:22

Please I need help. I'm new here.

Post by NFSU2LORD »

I have updated my car.. but when the page finished loading after i pushed submit. The page returned to the main page (update your car). This means.. that the car is submit or what?
Excuse me i'm spanish. Please might you speak easy?
User avatar
T-man
Turbo Charged
Turbo Charged
Posts: 53
Joined: 19 Jan 2005, 21:28
Location: America

Post by T-man »

Do you mean upload? Make sure the pic is a jpeg file.
User avatar
uNkN0wN
Ricer
Ricer
Posts: 12
Joined: 25 Jan 2005, 00:36
Location: Tuning Shop

Post by uNkN0wN »

check your Private Messages nfsu2lord :D
User avatar
^Sparco^
Unbeatable
Unbeatable
Posts: 4293
Joined: 19 Mar 2004, 01:56
Location: VaLLaDoLiD (SPaiN)

Post by ^Sparco^ »

Cuando subes un coche tienes que esperar unas 24horas para que un moderador lo apruebe y lo ponga en tu garaje personal. Una vez que ha sido subido lo puedes ver aquí.

La imagen debe ser de 800x600 y ocupar menos de 150Kb.
De todas te recomiendo que la subas otra vez, y si dentro de un tiempo ves que está repetido puedes borrar uno de ellos :D

________________

When you submit a ride you have to wait about 24h to get your car approved by a mod and uploaded to your personal garage. Once it has been uploaded you can see it here.

The pic should be 800x600 sized and smaller than 150kb.
Anyway I suggest you to upload it again... In case you see it is twice uploaded you can always delete one of them :D
User avatar
uNkN0wN
Ricer
Ricer
Posts: 12
Joined: 25 Jan 2005, 00:36
Location: Tuning Shop

Post by uNkN0wN »

just a quote from the uploading rules ->

"The image you submit must be a JPG compressed image with size of everything between 800x600 and 1280x960 as long as the width and height are in 4:3 ratio. Most used image sizes that will be accepted are 800x600, 1024x768 and 1280x960."
Post Reply

Return to “Help & Support”