Tuning ECU and Turbo in NFS UG2

Soupa · Post by **Soupa** » 02 Jul 2007, 01:07

Yeah, another UG2 question. I've learned how to tune the basics parts of the cars in UG2, but I still don't understand how to tune the ECU and the Turbo.

So, anybody could give me tips and such about tuning those two parts?

Thanks.

snoopdogg879 · Post by **snoopdogg879** » 02 Jul 2007, 01:51

just use ur arrow keys and go side to side to select the one u want and up and down to move the blue bar up and down

Turbo King · Post by **Turbo King** » 02 Jul 2007, 02:06

I just tend to put it up to the max in the 5-6000 rpm section.. normally gives about 15-20 more hp than before tuning. Keep in mind you also want a fat torque curve

snoopdogg879 · Post by **snoopdogg879** » 02 Jul 2007, 02:48

yep

i didnt even know how to do the same thing then i just found out by accident

Soupa · Post by **Soupa** » 02 Jul 2007, 17:54

So, the two curves (Ecu curve and turbo curve) got to follow the torque curve?

snoopdogg879 · Post by **snoopdogg879** » 02 Jul 2007, 18:47

xturbo · Post by **xturbo** » 03 Jul 2007, 19:44

I use this with my 240sx and RX-8

For Turbo and ECU I count from the first bar 4 bars moving from left to right. U supposedly are now in 5 rpm. Give 1 up arrow (increase just 1) and then move to 6 and press once the up arrow key, and for 7 8 and 9 (or 10) the same. NOW, do the same but backwards. Remember to press only ONCE the up arrow key.

I noticed a change in my accel and also top speed without loosing time

Soupa · Post by **Soupa** » 04 Jul 2007, 02:10

Thanks, I'm gonna try that! ^^