NFSUnlimited.net

Yeah, another UG2 question. I've learned how to tune the basics parts of the cars in UG2, but I still don't understand how to tune the ECU and the Turbo.

So, anybody could give me tips and such about tuning those two parts?

Thanks.

just use ur arrow keys and go side to side to select the one u want and up and down to move the blue bar up and down

I just tend to put it up to the max in the 5-6000 rpm section.. normally gives about 15-20 more hp than before tuning. Keep in mind you also want a fat torque curve

yep

i didnt even know how to do the same thing then i just found out by accident

So, the two curves (Ecu curve and turbo curve) got to follow the torque curve?

yep

I use this with my 240sx and RX-8

For Turbo and ECU I count from the first bar 4 bars moving from left to right. U supposedly are now in 5 rpm. Give 1 up arrow (increase just 1) and then move to 6 and press once the up arrow key, and for 7 8 and 9 (or 10) the same. NOW, do the same but backwards. Remember to press only ONCE the up arrow key.

I noticed a change in my accel and also top speed without loosing time

Thanks, I'm gonna try that! ^^